Tesla charger installation

Tesla Wall Connector installation quotes in Melbourne

Independent guidance on installing a Tesla home charger in a Melbourne house, plus one enquiry that reaches up to four approved, licensed electricians.

What's different about a Tesla home charger

Electrically, a Tesla Wall Connector is installed like any other hard-wired AC wallbox: a dedicated circuit at the switchboard, correctly sized cable to the parking position, protection devices, mounting, connection, testing and certification. What tends to differ is the configuration — output is set by the installer to match the circuit, and the unit is typically commissioned through Tesla's setup process, including network connection and any load sharing between multiple connectors.

The tethered cable length also matters more than people expect. Wall Connectors ship with a fixed lead, so mounting position needs to suit how you actually park, including reversing in versus driving in and where the vehicle's charge port sits.

EV Charger Install Melbourne is independent and is not affiliated with, endorsed by or certified by Tesla. We do not carry out electrical work. If Tesla certified installation matters to you, raise it with each electrician and check Tesla's own installer list.

Before you request quotes

Three things worth checking first

Your supply

Most Melbourne homes are single phase, which suits a Wall Connector configured around 7kW. Higher output needs three phase — see single vs three phase.

Your switchboard

Spare ways and RCD protection decide whether board work is part of the quote.

Your photos

A shot of the open switchboard and of the proposed mounting wall lets electricians quote on real information rather than assumptions.

Common questions

Tesla charger installation FAQs

Who can install a Tesla Wall Connector in Melbourne?

Any licensed Victorian electrician may carry out the electrical work, and the installation must comply with AS/NZS 3000 and the manufacturer's instructions. Tesla also lists its own certified installers; we are not affiliated with Tesla and do not claim Tesla certification for our network. If certification matters to you, ask each electrician directly and check Tesla's own list.

What output does a Tesla Wall Connector deliver?

The current Wall Connector is commonly configured up to 7kW on a single phase supply and higher on three phase, with the installer setting the output to suit your circuit. The vehicle's onboard AC charger and your home supply both cap the real-world rate.

Can I use a Wall Connector for a non-Tesla EV?

In Australia the Wall Connector uses a Type 2 connector, which is the standard AC connector for most EVs sold here. Confirm compatibility for your specific vehicle before buying.

Do I need Wi-Fi for a Tesla Wall Connector?

Network connectivity is used for firmware updates and features such as load sharing between multiple units. Ask the electrician to confirm signal at the mounting position while they are quoting.

I bought the Wall Connector already — can I still get quotes?

Yes. Say so in your enquiry and note the model and rating. Your details go to electricians who install customer-supplied units.

Installing a different brand? See FoxESS charger installation or myenergi Zappi installation.

We are an information and quote request service — we do not carry out electrical work. All installations are performed by licensed electricians.

Ready to get EV charger quotes?

Tell us about your property, your EV and your electrical setup. Your enquiry is shared with up to four trusted, qualified and licensed electricians in your area, who contact you directly with a quote. Free, and no obligation.

GET EV CHARGER QUOTES LEARN ABOUT EV CHARGERS

Keep reading

More Melbourne EV charging guides

Independent, jargon-free information to help you work out what your home actually needs.